Graphtec CE-7000-40
The Graphtec CE7000-40 is suitable for sheet or roll materials up to 560mm wide with a maximum cutting width of 375mm. Comes with an auto registration feature, USB interface, LCD display, 2MB buffer & 8 selected settings. The CE7000-40 is similar to the CE7000-60, but is not available with a stand and is limited to cutting 375mm wide on a max sheet/roll size of 560mm. Comes complete with Graphtec Pro Studio Software & plug-ins for CorelDraw and Illustrator.
Enhanced basic specification and excellent cost-effectiveness
Max. cutting force 4.41N (450gf) and Max. cutting speed 1000mm/s
With maximum cutting force 4.41N (450gf) and maximum cutting speed 1000 mm/s, it enable to cut various media with high productivity.
Cutting performance that guaranties accurate 5m length cutting.
The media stocker helps stabilize the feeding of media. By adjusting the pressure of the middle push roller to the media in three levels, it prevent media floating.
Data output via USB flash memory without PC
When cutting data designed with Cutting Master 4 or Graphtec Pro Studio / Plus are saved to USB flash memory, it can be output directly to the cutting plotter by plugging in. This simplified work-flow enables users to operate without a computer.
Perforation cutting ability
Carrier Sheet Table
It is an optional item that can be attached to the front and back of the cutting plotter to support a carrier sheet.
User-friendly control panel
3.7 inch LCD display and easy-to-use control panel supports 10 languages.
Improved ARMS for high precision cutting (ARMS 8.0)
The Advanced Registration Mark Sensing system delivers precise Print & Cut results by using sensors to detect registration marks and perform axis alignment. Countless efficiency boosting features improve productivity for Print & Cut applications such as stickers and decals.
Data Link Function
By reading the Graphtec original Barcode, CE7000 automatically detects its linked data from PC or USB flash memory. This function is available regardless of which printer or RIP software is used.
Continuous Cut
Barcode data management allows cutting different data sequentially by detecting the “Start Mark” of the new Barcode. Sequential Print & Cut process with roll-media is now available.
Supports colored marks / specialty media
A wide variety of media types including holographic paper and reflective sheets are now compatible due to improvements of the ARMS sensor algorithm.
Supports Adobe Illustrator “Crop Marks”
Using the plug-in software Cutting Master 4, Adobe Illustrator crop marks will be available.
Expanded Cutting Area
The expanded cutting area to include objects outside of the area enclosed by registration marks. Production efficiency is enhanced by reducing media waste.
